Number Decal Set Vinyl Lot of 40 Mail Box Numbers Locker Truck Door Address Set

  

ONE LOT OF 40 NUMBERS Adhesive Backed Vinyl Transfer Stickers. COLOR: See image in photos and enter your selection on Personalization window. Read the description completely for a proper order. Enter YOUR COLOR CHOICE in the personalization window. If the Personalization window is not showing on your monitor, just message me YOUR COLOR CHOICE for the stickers.

You'll get ONE lot of 40 numbers, or the quantity of 40 number lots you order, transfer sticker(s) of what is the Color, Size and Font Style selected. There is NO BACKGROUND to these stickers. The background color will be the color of the surface you place the sticker on. These are not'heat transfers', but just vinyl stickers with transfer tape on top so you can apply all the numbers making up the sticker. All numbers are on a sheet, and you cut the ones off as you need.

Once applied you remove the tape transfer from the top. These are not for use on fabric. These are not suitable for use on textured surfaces. Simple installation instructions will be sent with the product. The surface first to ensure that it is free from grease, dirt, oil, etc.

Make sure the surface you will apply it is dry. For addresses in the USA. Depending on several factors, at our prerogative. Confirm your address on file is current and deliverable. We do not do business with. Contact via message first if faced with any issue regarding the decals. If the decal is defective or damaged upon arrival, notify us within 7 days with a photo of the defect or damage. Installation of decals are your responsibility and can be troublesome, especially if they are large. Video on platforms such as Youtube can show you how to install them if you need more than the simple instructions sent. With large decals especially we recommend using the "Hinge Method" of installation. If the surface is water resistant, you may consider the extremely soapy water application technique as well, which may also be found on Youtube. This technique is great when trying to avoid any small air bubbles that may be under the vinyl if not carefully applied using the dry method. We suggest you avoid installing in direct sunlight if temperature of surface is hot. The adhesive needs a few days to cure good onto the surface you've applied it to. Avoid rubbing or washing the surface of the vinyl for a few days after installing.